Tsw
Localizable UI strings shown by the sidewall scanner overlay.
String defaults are English. Override only the fields you want - the rest keep their defaults. Held by TswScannerConfig.texts; set individual strings via config.texts.textXxx = ….
Properties
Guidance text shown when the tire is not yet positioned within the overlay and the user needs to align it. Default value is "Align the tire within the overlay".
Status text shown while the camera calibrates exposure after the photo is taken. Default value is "Calibrating exposure...".
Status text shown while the camera calibrates white balance after the photo is taken. Default value is "Calibrating white balance...".
Guidance text shown when the device is at too steep an angle and the user needs to face the tire more directly. Default value is "Face tire more directly".
Status text shown while the camera refocuses after the photo is taken. Default value is "Focusing...".
Guidance text shown while the capture is being taken and the user should hold the device steady. Default value is "Hold steady".
Status text shown while the scanner is starting up, before the first guidance frame is available. Default value is "Initializing scanner".
Guidance text shown when the user is too close to the tire and needs to move away. Default value is "Move away".
Guidance text shown when the user is too far from the tire and needs to move closer. Default value is "Move closer".
Message shown centered below the tire overlay while the scanner has turned the torch on to compensate for a dark environment. Default value is "Too dark, turn on lights.".